Technical data
Unimog implement carrier

Technical data

Everything including engines, dimensions, axles and fuel tank volumes, as well as approach and departure angles.

In this area, we will provide you with information about technical details of all model variants of the Unimog implement carrier – starting with the engines and the dimensions, right up to axles and fuel tank volumes, as well as approach and departure angles.

You will also find further technical information and illustrations in the digital product information:

Content technical data 01
 
Compare the models here.
Model variant C 405.090 C 405.105
Wheelbase 2.800 mm 3.000/3.150/3.600 mm
Engine (Euro VI) OM 934 OM 934
Output kW/hp 140/190 170/231
Maximum torque speed (1/min) 750/1.200–1.600 900/1.200-1.600
Clutch
Transmissions UG 100/8 UG 100/8
Axles
front axle AU 4/3 CS 5,1 AU 5/5 CS 7,0
Rear axle HU 4/3 CS 5,5 HU 5/5 CS 8,0
Electrics 24 V 24 V
Battery capacity 140 Ah 140 Ah
Tank volume (fuel tank) (standard/optional) 145 l 145 l/200 l
Tank volume (AdBlue) 18 l 25 l
Steering with max. steering pressure ZF 8095/170 bar ZF 8098/150 bar
Brakes
Drive type (permanent all-wheel drive) 4 × 4 4 × 4
Perm. GVW (max. with relevant optional extras) 10,0 t 13,8/14,0 t
Max. weight on front axle 5,2 t 6,9/7,0 t
Max. weight on rear axle 5,5 t 7,8/8,0 t
Angle of approach with biggest tyres 25° 33°
Turning circle 12,6 m 13,7/14,3/16,5 m
Minimum vehicle dimensions (length × width × height) 4.900 × 2.150 × 2.820 mm 4.980/5.130/5.615 × 2.200 × 2.925 mm
Dump body interior dimensions 2.200 × 2.075 × 400 mm 2.385/2.900 × 2.075 × 400 mm
 
Compare the engines here.
Model variant 934.972 936.972
Output according to DIN (kW/hp) 170/231 220/299
Number of cylinders/arrangement 4 Vertical in-line 6
Operating principle 4-stroke diesel direct injection
Total displacement (cubic centimetres) 5.132 7.698
Injection pressure (bar) Until 2.400 2.400
Compression ratio 17,6 : 1 17,6 : 1
Max. torque (Nm) 900 1.200
Torque increase (%) 22 -
Fan drive Hydrostatic
Back to the top